-
-
产品中心/Products公司致力于PVC助剂行业，主导产品有环保复合钙锌稳定剂、PVC 加工助剂、PVC抗冲改性剂、PVC发泡调节剂、发泡剂以及PVC润滑剂，荧光增白剂等产品。
-
-
29
2025
-
09
Weather resistance of PVC profiles and pipes
作者：
Resin:
PVC resin has a number of double bonds and unstable structure, which is easy to break under the damage of light and oxygen, which causes discoloration of the product. The unstable structure of different resins is not the same, that is, the stability is not the same, so choose A resin excellent in stability and weather resistance is a prerequisite for maintaining the weather resistance of the product.
Titanium Dioxide:
In addition to imparting brightness and whiteness to the product, titanium dioxide can also absorb solar ultraviolet rays to avoid and reduce the influence of ultraviolet rays on the surface of PVC profiles and pipes. There are two methods for the production of titanium dioxide in the world: sulfuric acid method and oxidation. The titanium dioxide produced by the sulfuric acid method contains residual SO42-, which easily reacts with the lead in the product, and has an influence on the color of the surface of the product. In addition, the tetravalent titanium in the titanium white powder becomes trivalent titanium (the surface of the product becomes black). Titanium dioxide can be classified into anatase type and rutile type depending on the crystal form. Rutile titanium dioxide has strong ultraviolet shielding effect and excellent weather resistance; anatase titanium dioxide has the effect of promoting PVC photoaging, so gold red titanium dioxide is selected among PVC pipe and profile products.
Stabilizer:
In the PVC extrusion process, the stabilizer acts to prevent the molecular chain of the PVC resin from causing damage and degradation under heat and shear, and also prevents the action of photo-oxidation and thermal oxygen during storage and use. It causes degradation. The stabilizers currently used in profiles and pipes mainly include composite lead salts, organotin and calcium-zinc stabilizers. The composite lead salts have good thermal stability, but residual SO42- and Cl3+ remain in the process. Ions, if these ions are too high, interact with Pb2+ under the direct action of visible light, producing gray spots on the surface, sometimes yellow mixed with gray, and Pb2+ remaining in the product easily reacts with S in the air to generate Black PbS, these areas on the surface of the product are easy to blacken, the organotin stabilizer has good thermal stability and transparency, but the transmittance of organotin is close to that of PVC, which cannot effectively protect the UV from destroying PVC ions, so Weather resistance is worse than lead salt and calcium-zinc stabilizer. Only a large amount of shielding titanium dioxide can be added to meet the weather resistance requirements. The main components of calcium-zinc stabilizers are calcium-zinc soap salts, auxiliary stabilizers, antioxidants, and lubricants; it acts as a stabilizing agent while absorbing UV light, and calcium-zinc stabilizers are added to a large number of different types. Antioxidants, such as 1010, 1076, can alleviate the degradation of PVC under the action of photo-oxidation and thermal oxygen, especially the initial weather resistance of PVC profiles and pipes has a greater effect.
Calcium carbonate:
The content of calcium carbonate has an effect on the weatherability of the product. The higher the content of calcium carbonate, the actual reduction of the content of titanium dioxide and stabilizer, the shielding effect of titanium dioxide and the anti-oxidation and stability of the stabilizer.
Toughener:
The most widely used in pipes and profiles are CPE and impact-resistant ACR. HCl is produced during the production of CPE. It is coated in CPE particles and mixed with PVC. Sex molecules, which catalyze the decomposition of PVC under the action of light, heat and oxygen, will cause discoloration of the surface of the product. The impact ACR is an acrylate core-shell copolymer, which improves the impact resistance of the product while improving the weather resistance of the product. Absorbent ACR is basically used all over the country as an impact modifier.
1. Calcium-zinc stabilizer can produce hard products with better weather resistance, and is more suitable for outdoor products.
2. The weather resistance of the product is related to the quantity of resin, titanium dioxide, stabilizer, impact modifier and calcium carbonate. To produce products that meet the requirements of weather resistance, it is necessary to select raw materials with good performance and stable quality, and design to meet the requirements of production. Formulations, calcium zinc stabilizers produced under the same conditions have better weatherability than organotin and lead salt stabilizers.
3. The weathering resistance of calcium-zinc stabilizers of different systems is quite different, which is related to the formulation composition and antioxidant content. Therefore, users are advised to use calcium-zinc stabilizers with caution.
最新动态
2025-09-29
工学院于海峰课题组液晶与高分子复合材料多层级微结构的构筑和光调控研究取得进展
液晶与高分子复合材料的多层级微相结构在纳米模板、纳米印刷和信息防伪等领域有着潜在应用前景，近年来受到研究者的广泛关注。由于液晶基元具有“刺激响应”特性，因此将液晶作为功能基团引入到嵌段共聚物中，可以使大面积规整纳米结构的制备与调控成为可能。
2025-09-29
Weather resistance of PVC profiles and pipes
PVC resin has a number of double bonds and unstable structure, which is easy to break under the damage of light and oxygen, which causes discoloration of the product. The unstable structure of different resins is not the same, that is, the stability is not the same, so choose A resin excellent in stability and weather resistance is a prerequisite for maintaining the weather resistance of the product.
2025-09-29
高分子材料氧化老化的快速检测
高分子材料是材料领域之中的后起之秀，但其发展速度远远超过其他传统材料。不同结构的高分子材料及其各式各样的用途在许多领域中找到了应用，满足了不同行业的需求。然而，由于各种环境因素的综合作用，老化现象不可避免地出现在各个环节，影响材料的性能和寿命等。及时快速地对高分子材料进行检测已经成为日益迫切的需求。日本TohokuElectronicIndustrial公司生产的超高灵敏度材料氧化分析仪（CLA）
2025-09-29
Reasons and solutions for yellowing of pvc profiles
In the production of pvc profile and its application, thermal photooxidation reaction will occur. The polymer macromolecule will be oxidized by trace moisture, acid, alkali and other impurities under the action of heat and pressure, and the molecular weight will decrease. Molecular structure changes. This chemical change is called degradation, and the most intuitive performance is that the surface is yellowed, the gloss gradually disappears, and even the gray is changed. The discoloration of the profile causes the customer to have doubts about the performance of the PVC material, and the consequences are serious.
